HP HPE6-A73 Practice Exam Questions

HP HPE6-A73 Sample Question Answers

Question # 1

Which AOS-CX switches support weighted fair queuing (WFQ)? 

A. Both 8320 and 8325 
B. Both 6300 and 6400 
C. 8400 only 
D. 6300 only 

Show Answer

Question # 2

What would prevent two OSPF routers from forming an adjacency? (Select two.) 

A. Different priorities 
B. Different area types 
C. Different MTU sizes 
D. Different IP addresses 
E. Different router IDs 

Show Answer

Question # 3

Which AOS-CX feature is used to prevent head-on-line (HOL) blocking? 

A. VSF 
B. WFQ
C. VOQ 
D. VSX 

Show Answer

Question # 4

A company uses NetEdit to manage a network of 700 AOS-CX switches and approximately 1,000 other SNMP-capable devices. Which management solution should the company use to monitor all the devices, as well as see a topology picture of how all the devices are connected together?

A. NetEdit
B. Aruba AirWave 
C. Aruba Activate 
D. Network Analysis Engine (NAE) 

Show Answer

Question # 5

An administrator is managing a pair of core AOS-CX switches configured for VSX. Connected to this core are pairs of aggregation layer AOS-CX switches configured for VSX. OSPF is running between the aggregation and core layers. To speed up OSPF convergence, the administrator has configured BFD between the core and aggregation switches. What is a best practice the administrator should implement to reduce CPU processing on the switches if a BFD neighbor fails? 

A. Disable ICMP redirects 
B. Implement graceful restart 
C. Increase the BFD echo timers 
D. Increase the VSX keepalive timer 

Show Answer

Question # 6

The company has just upgraded their access layer switches with AOS-CX switches and implemented an AAA solution with ClearPass. The company has become concerned about what actually connects to the user ports on the access layer switch, Therefore, the company is implementing 802.1X authentication on the AOS-CX switches. An administrator has globally enabled 802.1X, and has enabled it on all the access ports connected to user devices, including VoIP phones, security cameras, and wireless Aruba IAPs. Wireless users are complaining that they successfully authenticate to the IAPs; however, they do not have access to network resources. Previously, this worked before 802.1X was implemented on the AOS-CX switches. What should the company do to solve this problem?

A. Implement device-based mode on the lAP-connected AOS-CX switch ports. 
B. Implement local user roles and local forwarding on the AOS-CX switches. 
C. Implement downloadable user roles and user-based tunneling (UBT) on the AOS-CX switches. 
D. Implement AAA RADIUS change of authorization on the AOS-CX switches. 

Show Answer

Question # 7

A switch will apply a device profile to a port based on which pieces of information? (Select two.) 

A. IP header 
B. MAC address 
C. LLDP 
D. User role 
E. 802.1Q 

Show Answer

Question # 8

A company has recently upgraded their campus switching infrastructure with AOS-CX switches. They have implemented 802.1X authentication on access ports where laptop and IOT devices typically connect. An administrator has noticed that for POE devices, the AOS-CX switch ports are delivering the maximum wattage to the port instead of what the device actually needs. Concerned about this waste of electricity, what should the administrator implement to solve this problem?

A. Implement a classifier policy with the correct power definitions 
B. Create device profiles with the correct power definitions 
C. Enable AAA authentication to exempt LLDP and/or CDP information 
D. Globally enable the QoS trust setting for LLDP and/or CDP 

Show Answer

Question # 9

A company requires access by all users, guests, and employees to be authenticated. Employees will be authenticated using 802.1X, whereas guests will be authenticated using captive portal. Which type of authentication must be configured on an AOS-CX switch ports where both guests and employees connect?

A. Both 802.1X and captive portal 
B. 802.1X only 
C. Both 802.1X and MAC-Auth 
D. 802.1X, captive portal, and MAC-Auth 

Show Answer

Question # 10

Which option correctly defines how to identify a VLAN as a voice VLAN on an AOS-CX switch? 

A. Switch(config)# port-access lldp-group Switch(config-lldp-group)# vlan
 B. Switch(config)# port-access role Switch(config-pa-role)# vlan access 
C. Switch(config)# vlan Switch(config-vlan-)# voice 
D. Switch(config)# vlan voice 

Show Answer