Getting ready for the Cisco 300-730 certification exam can feel challenging, but with the right preparation, success is closer than you think. At PASS4EXAMS, we provide authentic, verified, and updated study materials designed to help you pass confidently on your first attempt.
Why Choose PASS4EXAMS for Cisco 300-730?
At PASS4EXAMS, we focus on real results. Our exam preparation materials are carefully developed to match the latest exam structure and objectives.
Real Exam-Based Questions – Practice with content that reflects the actual Cisco 300-730 exam pattern.
Updated Regularly – Stay current with the most recent 300-730 syllabus and vendor updates.
Verified by Experts – Every question is reviewed by certified professionals for accuracy and quality.
Instant Access – Download your materials immediately after purchase and start preparing right away.
100% Pass Guarantee – If you prepare with PASS4EXAMS, your success is fully guaranteed.
What’s Inside the Cisco 300-730 Study Material
When you choose PASS4EXAMS, you get a complete and reliable preparation experience:
Comprehensive Question & Answer Sets that cover all exam objectives.
Practice Tests that simulate the real exam environment.
Detailed Explanations to strengthen understanding of each concept.
Free 3 months Updates ensuring your material stays relevant.
Expert Preparation Tips to help you study efficiently and effectively.
Why Get Certified?
Earning your Cisco 300-730 certification demonstrates your professional competence, validates your technical skills, and enhances your career opportunities. It’s a globally recognized credential that helps you stand out in the competitive IT industry.
Cisco 300-730 Sample Question Answers
Question # 1
An engineer must investigate a connectivity issue and decides to use the packet capture feature onCisco FTD. The goal is to see the real packet going through the Cisco FTD device and see Snortdetection actions as a part of the output. After the capture-traffic command is issued, only thepackets are displayed. Which action resolves this issue?
A. Specify the trace using the -T option after the capture-traffic command B. Perform the trace within the Cisco FMC GUI instead of the Cisco FMC CLI C. Use the verbose option as a part of the capture-traffic command D. Use the capture command and specify the trace option to get the required information
Answer: A
Explanation:
The correct answer is
A. Specify the trace using the -T option after the capture-traffic command.
According to the document Use Firepower Threat Defense Captures and Packet Tracer, the capturetraffic
command allows you to capture packets on the Snort engine domain of the FTD device.
However, by default, it only shows the packet headers and does not include the Snort detection
actions. To see the Snort detection actions, you need to use the -T option, which enables tracing. For
example:
capture-traffic -T
This will show the packet headers along with the Snort verdicts, such as allow, block, or replace. You
can also use other options to filter or save the capture output1.
B. Performing the trace within the Cisco FMC GUI instead of the Cisco FMC CLI is not a valid option,
because the FMC GUI does not support packet capture or tracing on the FTD device. You can only use
the FMC GUI to view and export captures that are taken on the FTD CLI1.
C. Using the verbose option as a part of the capture-traffic command is not a valid option, because
there is no verbose option for this command. The verbose option is only available for the capture
command, which is used to capture packets on the LINA engine domain of the FTD device1.
D. Using the capture command and specifying the trace option to get the required information is not
a valid option, because the capture command does not have a trace option. The capture command
allows you to capture packets on the LINA engine domain of the FTD device, but it does not show the
Snort detection actions. The trace option is only available for the packet-tracer command, which is
used to simulate a packet going through the FTD device and show its processing steps1.
used to simulate a packet going through the FTD device and show its processing steps1.
Question # 2
A network administrator wants to block traffic to a known malware site at https:/www.badsite.comand all subdomains while ensuring no packets from any internal client are sent to that site. Whichtype of policy must the network administrator use to accomplish this goal?
A. Access Control policy with URL filtering B. Prefilter policy C. DNS policy D. SSL policy
Answer: A
Explanation:
The correct answer is
A. Access Control policy with URL filtering. An Access Control policy is a type of
policy that allows you to control how traffic is handled on your network based on various criteria,
such as source and destination IP addresses, ports, protocols, applications, users, and URLs. URL
filtering is a feature that enables you to block or allow traffic based on the URL category or
reputation of the website. You can create custom URL objects to specify the exact URLs or domains
that you want to block or allow. For example, you can create a URL object for
https:/www.badsite.com and set it to block. This will prevent any traffic from reaching that site and
any subdomains under it12.
B. Prefilter policy is a type of policy that allows you to perform fast actions on traffic before it reaches
the Access Control policy. You can use prefilter rules to drop, fastpath, or trust traffic based on simple
criteria, such as IP addresses or ports. However, prefilter rules do not support URL filtering, so you
cannot use them to block traffic based on the website domain3.
C. DNS policy is a type of policy that allows you to inspect and modify DNS requests and responses on
your network. You can use DNS rules to block, monitor, or sinkhole DNS queries based on the
requested domain name or the response IP address. However, DNS policy does not prevent packets
from being sent to the malicious site; it only prevents the DNS resolution of the domain name. A
client could still access the site if they know the IP address or use an alternative DNS server.
D. SSL policy is a type of policy that allows you to decrypt and inspect encrypted traffic on your
network. You can use SSL rules to determine which traffic to decrypt based on various criteria, such
as certificate attributes, cipher suites, or URL categories. However, SSL policy does not block traffic; it
only decrypts it for further inspection by other policies.
Question # 3
A network administrator is deploying a Cisco IPS appliance and needs it to operate initially withoutaffecting traffic flows. It must also collect data to provide a baseline of unwanted traffic before beingreconfigured to drop it. Which Cisco IPS mode meets these requirements?
A. failsafe B. inline tap C. promiscuous D. bypass
Answer: C
Explanation:
The correct answer is C. promiscuous mode. In promiscuous mode, the Cisco IPS appliance operates
as a passive device that monitors a copy of the network traffic and analyzes it for malicious activity.
The appliance does not affect the traffic flow, but it can generate alerts, logs, and reports based on
the configured security policy. Promiscuous mode is useful for initial deployment and baseline
analysis, as well as for monitoring low-risk segments of the network12.
A. failsafe mode is a feature that determines how the appliance behaves when a hardware or
software failure occurs. It does not affect the normal traffic flow or analysis3. B. inline tap mode is a
variation of inline mode that allows the appliance to pass traffic without inspection in case of a
power failure or a software crash. It does not allow the appliance to collect data without affecting
traffic4. D. bypass mode is a feature that enables the appliance to bypass traffic without inspection
when it is overloaded or under maintenance. It does not allow the appliance to analyze traffic and
generate alerts.
1: How the Sensor Functions 2: Cisco ASA IPS Module Quick Start Guide 3: Failsafe Mode 4: Inline Tap
Mode : Bypass Mode
Question # 4
An engineer is creating an URL object on Cisco FMC. How must it be configured so that the object willmatch for HTTPS traffic in an access control policy?
A. Specify the protocol to match (HTTP or HTTPS). B. Use the FQDN including the subdomain for the website. C. Use the subject common name from the website certificate. D. Define the path to the individual webpage that uses HTTPS.
Answer: B
Explanation:
Use the FQDN including the subdomain for the website. According to the Firepower Management
Center Configuration Guide, Version 6.61, when you create a URL object, you must use the fully
qualified domain name (FQDN) of the website, including any subdomains, and omit the protocol
prefix (HTTP or HTTPS). For example, to match www.example.com, you must enter
https://www.example.com. The system automatically matches both HTTP and HTTPS traffic for the
same FQDN. Specifying the protocol to match (HTTP or HTTPS) is not required and will result in an
invalid URL object. Using the subject common name from the website certificate or defining the path
to the individual webpage that uses HTTPS are not supported options for URL objects.
Question # 5
A network engineer must expand a company's Cisco AnyConnect solution. Currently, a Cisco ASA isset up in North America and another will be installed in Europe with a different IP address. Usersshould connect to the ASA that has the lowest Round Trip Time from their network location asmeasured by the AnyConnect client. Which solution must be implemented to meet thisrequirement?
A. VPN Load Balancing B. IP SLA C. DNS Load Balancing D. Optimal Gateway Selection
Answer: D
Explanation:
Optimal Gateway Selection (OGS). OGS is a feature that can be used in order to determine which
gateway has the lowest Round Trip Time (RTT) and connect to that gateway. One can use the OGS
feature in order to minimize latency for Internet traffic without user intervention. With OGS, Cisco
AnyConnect Secure Mobility Client (AnyConnect) identifies and selects which secure gateway is best
for connection or reconnection. OGS begins upon first connection or upon a reconnection at least
four hours after the previous disconnection.
Question # 6
Which clientless SSLVPN supported feature works when the http-only-cookie command is enabled?
A. Citrix load balancer B. port reflector C. Java rewriter - D. script browser
The following Clientless SSL VPN features will not work when the http-only-cookie command is
enabled:
Java plug-ins
Java rewriter
Port forwarding
File browser
Sharepoint features that require desktop applications (for example, MS Office applications)
AnyConnect Web launch
Citrix Receiver, XenDesktop, and Xenon
Other non-browser-based and browser plugin-based applications
Question # 7
An administrator is deciding which authentication protocol should be implemented for theirupcoming Cisco AnyConnect deployment. A list of the security requirements from uppermanagement are: the ability to force AnyConnect users to use complex passwords such asC1$c0451035084!, warn users a few days before their password expires, and allow users to changetheir password during a remote access session. Which authentication protocol must be used to meetthese requirements?
A. LDAPS B. RADIUS C. Kerberos D. TACACS+
Answer: A
Explanation:
To enforce complex passwords”for example, to require that a password contain upper- and
lowercase letters, numbers, and special characters”enter the password-management command in
tunnel-group general-attributes configuration mode on the ASA and perform the following steps
A network administrator wants the Cisco ASA to automatically start downloading the CiscoAnyConnect client without prompting the user to select between WebVPN or AnyConnect. Whichcommand accomplishes this task?
A. anyconnect ssl df-bit-ignore enable B. anyconnect ask none default anyconnect C. anyconnect ask enable default anyconnect D. anyconnect modules value default
Which two protocols does DMVPN leverage to build dynamic VPNs to multiple destinations? (Choose
two.)
A. IKEv2 B. NHRP C. mGRE D. mBGP E. GDOI
Answer: BC
Question # 10
An engineer is implementing the FlexVPN solution on a Cisco IOS router. The router must onlyterminate VPN requests and must not initiate them. Additionally, the interface must support VPNsfrom other routers and Cisco AnyConnect connections. Which interface type must be configured tomeet these requirements?
A. point-to-point GRE tunnel interface B. multipoint GRE tunnel interface C. static virtual tunnel interface D. virtual template interface
Answer: D
Explanation:
The correct interface type to meet these requirements is the virtual template interface. This
interface allows for the creation of multiple virtual access interfaces, which can be used for various
types of remote access VPN connections, including site-to-site and AnyConnect VPNs. The virtual
template interface can be configured to terminate VPN requests from other routers and allow for
dynamic creation of VPN sessions, while also supporting AnyConnect VPN connections.